We know the expression: “a well-oiled machine”, but we also know that experts in the automotive industry no longer strive for this. As it happens, we strive for the best oiled machine! We are looking for the minor improvements that ensure there is less wear and tear, that there is a better surface quality and that production costs are lower. This is an attitude that has characterised and penetrated the entire group. As a supplier to this demanding industry, the Micro Machining Group is continually searching for opportunities to optimise the process, thus achieving minor improvements. We immediately see this reflected in our production processes, but also in our stock management, delivery reliability and quality control.

We make a difference by seamlessly integrating our processes into your chain.Roel H. Klein - Managing Director
Small improvements GREAT RESULTS

The Micro Machining Group supplies the right amount of precision mechanical components of the right quality at the right time; this is what ´just-in-time´ means to us. If necessary, we even take over additional stages from your production process to fit even better into your production chain and increase efficiency. In concrete terms, this means we are a partner that makes a significant contribution to your processes and we therefore add value.


For hundreds of years now, the military has been an important driver of innovation, which currently occurs mainly in the field of electronics and weight reduction. Equipment must be quickly and efficiently deployable for a wide variety of purposes. The use of high-quality material types and processes contributes to this weight reduction, whilst maintaining enhanced structural strength. All this requires a unique palette of suppliers for this market. Needless to say, engineering, quality, precision and reliability play an important role in the production of components.

The defence market is a true driver of technological innovative power. Roel H. Klein - Managing Director
Efficient and applicable

For many years, we have been a supplier of electronics enclosures, components for optical systems and suspension systems for radar and antenna equipment, among other things. These components require accuracy and finishing. Choice of material and state-of-the-art production technologies also play an important role. For this reason, we are regularly involved in preparing these components for production at an early stage.


The unique knowledge and capacities of the Micro Machining Group, ensures that we are known to the Ministry of Defence as a reliable partner and system supplier. The Micro Machining Group has modern production equipment in addition to all the necessary certificates (AS9100-Rev C and AQAP 2120) as a result of which every client requirement can be fulfilled.

We would be pleased to contact you about the challenges you are facing, and discuss how we can offer support.


Due to the ever increasing use of mobile phones and tablets, the rise of ‘wearable computing’ and the fact that processors and electronics are used in an ever increasing number of applications, a great many opportunities are created in the semiconductor market. On the other hand, there are a number of significant threats, for if you want to maintain a share in a rapidly changing market, you are expected to keep innovating all the time. The Micro Machining Group contributes towards the innovative power of its partners by continuously innovating itself in the area of production processes, materials and chain integration.

The Micro Machining Group has distinguished itself for years in this market through its innovative power, quality and delivery reliability.Roel H. Klein - Managing Director
OUR CONTRIBUTION to your innovation

For years now, the basis of innovation in this market has been the focus on even smaller and more precise products. Of course, for you this means that your processes and products are becoming increasingly complex, but for your suppliers this means that quality requirements and regulations are being tightened up every year. For years, The Micro Machining Group has distinguished itself in this market through its innovative power, quality and delivery reliability and feels completely at home in this demanding market. We adapt our production methods in such a way that they fit perfectly in your chain, and we work closely with you to set up all processes as efficiently as possible without compromising quality levels.

The Micro Machining Group has assembly facilities and can perform the cleaning of your components in various gradations. In addition, we have the opportunity to undertake a many types of heat and surface treatments for you. We naturally have all the certificates required to supply to your market.

Please let us know what challenges are preoccupying you at the moment; we will be pleased to let you know how we can contribute.

Oil and gas

The safe and successful extraction of oil of gas depends entirely on the equipment and materials used, while, at the same time, our entire society is fully dependent on the stable extraction and transportation of these fuels and raw materials. Yet this already demanding market is constantly moving as extraction becomes increasingly difficult and thus more costly due to various factors. The market therefore requires innovations that improve exploration, extraction or transportation. Of course, a reliable supplier is essential, but an even more important factor is a partner that contributes towards the challenge that is so essential for your position in the market. For years now, the Micro Machining Group has worked for large international players in your market that know they can rely on us, and not surprisingly, we are proud of the performance we have delivered as well as our reliability.

Innovation in the use of materials, production processes and quality control.Roel H. Klein - Managing Director
Reliable and innovative

We are, of course, fully informed of the increasingly strict requirements in this market, and we try to anticipate these through innovation in the use of materials, production processes and quality control. The Micro Machining Group has experience and expertise in the processing of regular metals, but also works with non-magnetic materials, stainless steel, various duplex and Inconel variants and titanium. Our processes and methods naturally comply with the requirements of all the certificates that are applicable in your market.


It is also possible to have the most specialist heat and surface treatments performed within the Micro Machining Group. So we are capable of taking over of a large part of the production process from you.

We would be pleased to contact you with regard to the challenges now facing you to discuss how we can contribute to your solution.

Medical / Optical

When we speak of a market segment that seeks the boundaries of the technically feasible, we think of the Medical and Optical market. You probably know what is required to make the next technological advance, but it will not be practically feasible until your supplier actually delivers on that new level of quality and precision.

In the medical world, cost control is high on the agenda, for example, and you have to adapt or develop products that meet this new standard. We can assist you in choosing the right materials and can advise you on the correct processing methods and surface treatments. A good example of this is the trade-off between processing treatments. By choosing a different process it is suddenly possible to perform injection moulding on a component or create it from solid material, as a result of which a significant reduction in costs can be realised. The Micro Machining Group assists you in this process, works with you as early as in the design process and informs you about the consequences of certain choices for your end product.


We regularly receive questions from the optical world about the option of manufacturing and supplying a certain component and what has to be considered if this component is to be produced. In many cases, together with your specialists, and on the basis of your drawings, we work on a prototype component that approaches the design as closely as possible to ensure batch delivery. This is to guarantee that you obtain the product you require, but also to ensure that the component complies with your requirements in the field of quality, finishing and cost price.

The Micro Machining Group is certified in accordance with ISO 13485:2012 to supply to the Medical and Optical industries, guarantees delivery reliability and has the capacity to perform 100% quality checks. In addition, we are capable of carrying out all possible surface, heat and cleaning treatments for you.

We would be pleased to contact you in order to establish what contribution we can make towards your next technologically superior products.


Aviation and aerospace

The aviation and aerospace market is characterised by a number of important developments. The components are becoming ever more complex, supply chain risks are increasing and companies are focusing more and more on the global market. These trends create a situation where excelling in one single aspect no longer suffices, as the market expects both innovation and close cooperation but does not always allow the price to increase in tandem with this. The result is that client relationships have developed into integral partnerships where the Micro Machining Group integrates its processes into the chain of the client, and at the production level more and more co-creation occurs.

We would be pleased to contact you with regard to your specific challenges and will be happy to explain how we can arrive at solutions together with you.

Innovation through close collaberation

By talking to the Micro Machining Group about ideas, possibilities and wishes in an early stage, you can use our expertise and experience as early as during the development process. We will be pleased to keep you informed about essential developments within our discipline and let you know what opportunities these advances offer in terms of assembly or production, for example. We have a great deal of experience in the processing of unusual materials such as titanium and have the machines and facilities required to produce the most complex components. We will be pleased to show you a number of interesting examples of products and components bearing testimony to our capacity and expertise.

Of course, we have the certificates (AS9100-rev.C) that are required to supply to your market and, in addition to our options in terms of production, we are fully equipped to take over various processing stages from you. For example, we are capable of integrally carrying out various cleaning processes as well as a broad range of heat and surface treatments.